Rigol DS2000E Series Programming Guide

2 Command System RIGOL
DS2000E Programming Guide
2-117
:FUNCtion:WANalyze:SETup:THReshold
Syntax
:FUNCtion:WANalyze:SETup:THReshold <NR1>
:FUNCtion:WANalyze:SETup:THReshold?
Description
Set or query the threshold of waveform analysis, and the unit is %.
Parameter
Name Type Range Default
<NR1> Integer 1 to 99 10
Explanation
The threshold is used to judge whether the data frame is an error frame. The data frame will be judged as
an error frame if the (relative) difference between it and the template is greater than or equal to the
threshold currently set.
Return Format
The query returns an integer between 1 and 99.
:FUNCtion:WANalyze:SETup:XMASk
:FUNCtion:WANalyze:SETup:YMASk
Syntax
:FUNCtion:WANalyze:SETup:XMASk <x>
:FUNCtion:WANalyze:SETup:XMASk?
:FUNCtion:WANalyze:SETup:YMASk <y>
:FUNCtion:WANalyze:SETup:YMASk?
Description
Set or query the horizontal adjustment parameter in analysis based on the pass/fail mask, and the unit is
div.
Set or query the vertical adjustment parameter in analysis based on the pass/fail mask, and the unit is
div.
Parameter
Name Type Range Default
<x> Real 0.02 to 4, the step is 0.02 0.24
<y> Real 0.04 to 5.12, the step is 0.04 0.48
Return Format
The query returns the horizontal or vertical adjustment parameter in analysis based on the pass/fail mask
in scientific notation.

Rigol DS2000E Series Specifications

General

Bandwidth	70 MHz to 200 MHz
Channels	2 or 4
Vertical Sensitivity	1 mV/div to 10 V/div
Vertical Resolution	8-bit
Timebase Range	2 ns/div to 50 s/div
Memory Depth	14 Mpts
Input Impedance	1 MΩ ± 1%
Trigger Modes	Edge, Pulse, Video
Waveform Capture Rate	50, 000 wfm/s
Interfaces	USB, LAN
Power Supply	100-240 VAC
Display	8-inch WVGA (800x480) LCD