Rigol DS2000E Series Programming Guide

RIGOL 2 Command System
2-252 DS2000E Programming Guide
:TRIGger:CAN:SPOint
Syntax
:TRIGger:CAN:SPOint <spo>
:TRIGger:CAN:SPOint?
Description
Set or query the sample point (expressed in percentage) of CAN trigger.
Parameter
Name Type Range Default
<spo> Integer 5 to 95 50
Return Format
The query returns the sample point of CAN trigger in integer.
:TRIGger:CAN:FTYPe
Syntax
:TRIGger:CAN:FTYPe <ftype>
:TRIGger:CAN:FTYPe?
Description
Set ro query the frame type of CAN trigger (when the trigger condition is FTYPe).
Parameter
Name Type Range Default
<ftype> Discrete {DATA|REMote|ERRor|OVERload} DATA
Explanation
When the CAN trigger condition is set to FTYPe (frame type) (
:TRIGger:CAN:WHEN), you can use this
command to set the oscilloscope to trigger when the specified type of frame is detected.
Return Format
The query returns DATA, REM, ERR, or OVER.

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English