00-00-00
Effectivity 912/914 Series
Edition 1 / Rev. 0
page 33
May 01/2007
d02620
BRP-Rotax
Maintenance Manual
10) Maintenance
The following sections describe maintenance procedure for engines of the 912/914
Series above and beyond the maintenance and special checks, see corresponding
Maintenance Manual (Line Maintenance) for the respective engine type, 912 Series or
914 Series, and the systems descriptions given hitherto. The description is subdivided
into subsections and descriptions of the function of the various systems.
Some overlapping maintenance instructions are treated as generally valid information
at the beginning of this chapter.
10.1) Trouble shooting
In the Operator’s Manual, possible problems as well as feasible remedies are
listed. At the same time, brief reference is made to the necessary remedial
action.
See the respective sections in the Operators Manual for the corresponding
engine type in the 912/914 Series.
10.2) Tightening torques
In general, all screw connections on ROTAX engines must be tightened using
a torque wrench.
If not specified otherwise for a component, tighten screw connections to the
following torque:
M4 : 4 Nm (35 in.lb)
M5 : 6 Nm (55 in.lb)
M6 : 10 Nm (90 in.lb)
M8 : 24 Nm (17.7 ft.lb)
M10 : 35 Nm (25.8 ft.lb)
â—† NOTE: Adhere to the tightening torques specified see also indications
in the Illustrated Parts Catalog.
To Next Page
General
