Siemens SIMATIC IPC547J User Manual

Device maintenance and repair
7.4 Installing operating system, software and drivers
Operating Instructions, 01/2021, A5E43920357-AA
143
7.4 Installing operating system, software and drivers
7.4.1 Restoring or installing the operating system
Information on restoring or reinstalling the operating system you ordered with the device can
be found in the detailed operating system description, see "Important instructions and
manuals for operating the device (Page 11)".
7.4.2 Installing software and drivers
On the supplied USB stick (read only), you will find the "Documentation and Drivers" suite
which you can use to install all supplied software and drivers.
Procedure
1. Insert the provided USB stick into the device.
2. Run the file "START_DocuAndDrivers.CMD".
The "Documentation and Drivers" suite opens.
3. Install the components you want.
7.5 Configuring firmware/BIOS
You can find information on configuring the firmware settings in the firmware description,
see "Important instructions and manuals for operating the device (Page 11)".
Note
If your device no longer boots, for example, after operating system crash during a firmware
update, contact your local SIEMENS contact person.
7.6 Backing up data and changing partitions
Use the "SIMATIC IPC Image & Partition Creator" software to back up data under Windows®,
see "Important instructions and manuals for operating the device (Page 11)".

Siemens SIMATIC IPC547J Specifications

General

Brand	Siemens
Model	SIMATIC IPC547J
Category	Industrial PC
Language	English