Safety instructions
2.4 Safety instructions on ambient and environmental conditions
Operating Instructions, 01/2021, A5E43920357-AA
45
2.4 Safety instructions on ambient and environmental conditions
Approvals expire if the instructions are not observed
Approvals expire if the instructions are not observed
If the ambient and environmental conditions are not observed when installing and
operating the device or the system, the approvals according to IEC/EN/UL/CSA 61010-2-201
will become void.
There is a risk of overheating and personal injury.
Danger if ambient conditions are unsuitable
Ambient conditions and chemical resistance
Unsuitable ambient conditions may cause faults or damage the device.
In the event of non-compliance, the warranty and approval expire according to
IEC/EN/UL/CSA 61010-2-201.
• When the device is operated in severe environments which are subject to caustic vapors
or gases, ensure sufficient clean air is provided.
• Clean the enclosure surface with a damp cloth.
Make sure that no water gets inside the device.
To Next Page
Loading...
Need help?
General
