Siemens SIMOTICS CONNECT 400 User Manual

4. Enter the new password again in the "Repeat password" 󹪝eld.
5. Move on to the next step with the "Next" button.
8.5.2.3 Wi-Fi - Step 2/7
Connect the connectivity module to the Wi-Fi network.
Supported Wi-Fi networks
The current version of the SIMOTICS CONNECT 400 connectivity module does not support proxy
server con󹪝guration.
The connectivity module encrypts your data according to security standard WPA2. For data
transfer, the connectivity module supports Wi-Fi connections with a frequency of 2.4GHz
and the Wi-Fi standard 802.11b/g/n. Wi-Fi authentication protocols according to IEEE 802.1X
are not supported.
Procedure
1. The country code is determined automatically. Check that it is correct and modify the country
code, if necessary.
2. With the "Select other network" button, you can display the visible Wi-Fi networks.
3. Select the required Wi-Fi network from the list of visible networks.
4. Enter the Wi-Fi password. The Wi-Fi password must not exceed a maximum length of 32
characters.
Maintenance
8.5Replacing the connectivity module
SIMOTICS CONNECT 400
142 Operating Instructions, 04/2023, A5E50161952B AL

Siemens SIMOTICS CONNECT 400 Specifications

General

Brand	Siemens
Model	SIMOTICS CONNECT 400
Category	Control Unit
Language	English