Siemens SIMOTICS CONNECT 400 User Manual

3.2 "SIMOTICS CONNECT 400" connectivity module
The connectivity module mounted on the motor captures important operating and status
information of the motor.
The captured motor data are transmitted to SIDRIVEIQFleet via a Wi-Fi interface and
analyzed.
Note
The SIMOTICS CONNECT 400 connectivity module can be used in combination with rib-cooled
low-voltage induction motors (see Technical speci󹪝cations (Page206)).
In addition to motor monitoring, from V1.0.2.0, "Generic Vibration monitoring" can be set.
Using this function, additional components of the drive train can be monitored, for example,
gearbox, coupling, pillow block bearing, pump, fan, compressor as well as other rotating and
non-rotating parts.
Components
The connectivity module encompasses the following components:
• Integrated sensors to measure the motor data
• Data memory
• Processor
• Bluetooth module
• Wi-Fi communication module
• Lithium battery for the power supply
Description
3.2"SIMOTICS CONNECT 400" connectivity module
SIMOTICS CONNECT 400
24 Operating Instructions, 04/2023, A5E50161952B AL

Siemens SIMOTICS CONNECT 400 Specifications

General

Brand	Siemens
Model	SIMOTICS CONNECT 400
Category	Control Unit
Language	English