Siemens SIMOTICS CONNECT 400 User Manual

4. Enter the Bluetooth pairing PIN or insert the PIN from the clipboard.
5. Tap the "Pair" button to complete pairing.
6.3.3 Log in with the connectivity module
After a connection has been established from the "SIDRIVE IQ Con󹪝g" application to the
connectivity module, a window is displayed where you can enter the login data for the
connectivity module.
Factory settings for logging in
The factory settings for logging in are as follows:
• User name: "admin"
• Password: Comprising the last 6 digits of the serial number on the rating plate of the
connectivity module.
Caution: Not the serial number of the motor!
Note
Change the user name and password after logging on for the 󹪝rst time for protection against
unauthorized access to the connectivity module. In the "Device Credentials" step of the
commissioning wizard, you are requested to change the login data.
Commissioning
6.3Commissioning with iOS
SIMOTICS CONNECT 400
78 Operating Instructions, 04/2023, A5E50161952B AL

Siemens SIMOTICS CONNECT 400 Specifications

General

Brand	Siemens
Model	SIMOTICS CONNECT 400
Category	Control Unit
Language	English