Procedure
1. Change the measurement interval. The "Calculated battery life" is updated.
2. Change the synchronization interval. The "Calculated battery life" is updated.
3. Move on to the next step with the "Next" button.
8.5.3.6 MindSphere Access - Step 5/7
In the following step, you establish the MindSphere access for onboarding. The process applied
from connecting and registering the connectivity module through to the MindSphere
application "SIDRIVEIQ Fleet", including all settings, is called onboarding.
Maintenance
8.5Replacing the connectivity module
SIMOTICS CONNECT 400
164 Operating Instructions, 04/2023, A5E50161952B AL
To Next Page
Loading...
Need help?
General
