VL1500K5 (’05-MODEL) 13
ENGINE COMPONENTS REMOVABLE WITH ENGINE IN PLACE
The parts listed below can be removed and reinstalled without removing the engine from the frame. Refer to
the page listed in each section for removal and reinstallation instructions.
ENGINE LEFT SIDE
ENGINE RIGHT SIDE
ENGINE CENTER
PARTS REMOVAL INSTALLATION
Secondary case 3-24, 4-5 3-41, 4-10
Secondary driven bevel gear 3-25, 4-5 3-40, 4-10
* Gear position switch body 17 17
Clutch release cylinder 6-59 6-61
Starter torque limiter 3-27, 3D-1 3-36, 3D-6
Starter idle gear 3-17, 3D-1 3-60, 3D-6
Starter clutch 3-27, 3D-1, 3D-5 3-38, 3D-5, 3D-6
Gearshift lever and linkage 3-26, 3E-1 3-38, 3E-5
Generator 3-27, 3D-1 3-38, 3D-6
PARTS REMOVAL INSTALLATION
Clutch cover 3-20, 3C-1 3-50, 3C-5
Clutch pressure, drive and driven plates 3-20, 3C-1 3-48, 3C-5
Clutch sleeve hub 3-21, 3C-1 3-46, 3C-5
Clutch housing 3-22, 3C-2 3-46, 3C-4
Oil pump drive gears 3-22, 3C-2 3-46, 3C-4
Oil pump driven gears 3-23 3-45
Oil pressure switch 3-24, 3G-5 3-43, 3G-7
Oil pressure regulator 3-23, 3G-3 3-45, 3G-4
* EOT sensor 17 17
Back torque limiter 3-22, 3C-2 3-46, 3C-5
Rear clutch cover 3-6 3C-6
PARTS REMOVAL INSTALLATION
* Throttle body 104 110
Oil filter 2-6 2-7
Oil cooler 3G-5 3-13
Starter motor 7-14 7-17
SAMPLE
To Next Page
Loading...
Need help?
General
