2. Maintenance Information
2-2
Periodical Maintenance Schedule
Mainte
nance
Code
item
Every
300KM
1 Month
every
1000KM
3 month
every
3000KM
6 month
every
6000KM
1 year
every
12000KM
15 month
every
14500KM
1 ☆Air cleaner I C C R C
2 ☆Fuel filter I I R
3 ☆Oil filter C C C
4 ☆Engine oil change R Replacement for every 1000 km
5 Tire pressure I I I I I I
6 Battery inspection I I I I I I
7 Brake & free play check I I I I I I
8 Steering handle check I I I
9 Cushion operation check I I I
10 Every screw tightening
check
I I I I I I
11 Gear oil check for leaking I I I I I I
12 ☆Spark plug check or change I I R R R
13 ☆Gear oil change R Replacement for every 5000 km
14 Frame lubrication L L
15 Exhaust pipe I I I I I I
16 ☆Ignition timing I I I I I I
17 ☆emission check in Idling A I I I I I
18 ☆Throttle operation I I I I I
19 ☆Engine bolt tightening I I I I I
20 ☆CVT driving device(belt) I R I
21 ☆CVT driving device(roller) C C C
22 Lights/electrical
equipment/multi-meters
I I I I I I
23 Main/side stands & springs I I I
24 Fuel lines I I I I I
25 Shock absorbers I I I I
26 Cam chain I I I I I
27 ☆Valve clearance I A A A A
28 Lines & connections in
cooling system
I I I I I I
29 Coolant reservoir I I I I I I
30 Coolant I Replacement for every 1 year
Code: I ~ Inspection, cleaning, and adjustment R ~ Replacement C ~ Cleaning (replaced if necessary) L ~
Lubrication
Have your motorcycle checked, adjusted, and recorded maintenance data periodically by your SYM Authorized Dealer to
maintain the motorcycle at the optimum condition
The above maintenance schedule is established by taking the monthly 1000 kilometers as a reference which ever comes
first.
Remarks: 1. These marks “☆” in the schedule are emission control items. According to EPA regulations, these items
must be performed normally periodical maintenance following the use r manual instructions. They are
prohibited to be adjusted or repaired by unauthorized people. Otherwise, SYM is no responsible for the
charge.
2. Clean or replace the air cleaner element more often when the motorcycle is operated on dusty roads or in the
Heavily- polluted environment.
3. Maintenance should be performed more often if the motorcycle is frequently operated in high speed and after
the motorcycle has accumulated a higher mileage.
4. Preventive maintenance
a. Ignition system－Perform maintenance and check when continuous abnormal ignition, misfire, after-burn, overheating
occur.
b. Carbon deposit removal－Remove carbon deposits in cylinder head, piston heads, exhaust system when power is
obvious lower. Than ever
c. Replace worn out pistons, cylinder head.
To this chapter contents
To Next Page
Loading...
Need help?
General
