Sym X'PRO RV125 User Manual

2. Maintenance Information
2-11
Side Stand
Check side stand spring for damage or
looseness.
Press down side stand and pull it with spring
gauge. If gauge reading is over 2 kg, it means
that the spring capacity is in normal.
Check if side stand set is operated smoothly.
Make sure that side stand is no bending or
deformation.
Front / Rear Cushion
Warning
Do not ride the motorcycle with poor shock
absorber.
Looseness, wear or damage shock absorber
will make poor stability and drive-ability.
Front Cushion
Press down the front shock absorber for several
times to check it operation.
Check if it is damage
Replace relative parts if damage found.
Tighten all nuts and bolts.
Rear Cushion
Press down the front shock absorber for several
times to check it operation.
Check if it is damage
Replace relative parts if damage found.
Park the vehicle with main stand.
Turn the rear wheel forcefully and check if
engine bracket bushing worn out
Replace the bushing if looseness found.
Tighten all nuts and bolts.
Nuts / Bolts Tightness
Perform periodical maintenance in accord with
the Periodical Maintenance Schedule
Check if all bolts and nuts on the frame are
tightened securely.
Check all fixing pins, snap rings, hose clamps,
and wire holders for security.
Side stand
To this chapter contents

Sym X'PRO RV125 Specifications

General

Brand	Sym
Model	X'PRO RV125
Category	Scooter
Language	English