Tenda O3 User Manual

48
4.6 P2MP Mode (Only for O3)
4.6.1 Overview
In P2MP mode, this device connects 2 or more (this device supports 4 at most) wired networks with a wireless
link, but cannot be connected with wireless clients. P2MP mode is used to achieve communication between
multiple offices of an enterprise in a city.
The CPE in P2MP mode can work with the CPE in Repeater or P2MP mode. It supports one to four bridging at
most.
4.6.2 Setting up P2MP Mode
The configuration procedure of P2MP mode is similar to that of Repeater mode. The following example shows
that the main CPE in P2MP mode bridges to four CPEs in Repeater mode.

Tenda O3 Specifications

General

5 GHz	No
2.4 GHz	Yes
Number of users	15 user(s)
Transmitting power	29 dBmW
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Receiver sensitivity	MCS0: -88dBm MCS7: -72dBm
Maximum outdoor range	5000 m
Maximum data transfer rate	150 Mbit/s
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Placement	Wall
Certification	FCC / CE / RoHS
Product color	White
LED indicators	LAN, Power, WAN
International Protection (IP) code	IP64
Antenna features	Integrated antenna
Antenna gain level (max)	12 dBi
Output current	1 A
Output voltage	12 V
Power consumption (max)	6 W
Security algorithms	WPA, WPA2, WPA2-PSK
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	94.86 mm
Width	270 mm
Height	67.5 mm