TC-10 TURBOCHARGER SYSTEM - Turbocharger
REMOVAL OF TURBOCHARGER
(See page TC-9)
1. DRAIN ENGINE COOLANT (See page CO-4)
2. REMOVE INTAKE PIPE
(a) Disconnect the vacuum hose for the boost compen-
sator.
(b) Disconnect the air hose clamp bolt.
(c) Remove the three bolts and intake pipe.
3. REMOVE EXHAUST MANIFOLD HEAT INSULATOR
Remove the five bolts and heat insulator.
4. DISCONNECT WATER BY-PASS HOSES
5. REMOVE TURBO HEAT INSULATOR
Remove the two bolt and heat insulator.
6. REMOVE TURBOCHARGER STAY
Remove the three bolts and turbocharger stay.
To Next Page
Loading...
Need help?
General
