EM-58
ENGINE MECHANICAL - Cylinder Head
(b) Remove the ten nuts (1 PZ) or twelve nuts (1HZ),
exhaust manifold and two gaskets.
11. (1HD-T)
REMOVE TURBOCHARGER AND EXHAUST
MANIFOLD ASSEMBLY
(See steps 3 to 8 on pages TC-9, 10)
12. (1HZ and 1HD-T)
SEPARATE EXHAUST MANIFOLDS
(a) Separate the front and rear exhaust manifolds.
(b) Using snap ring pliers, remove the two manifold rings.
13. REMOVE TIMING BELT AND PULLEYS
(See steps 1 to 3 and 5 to 7 on pages EM-33 to 35)
To Next Page
Loading...
Need help?
General
