EM-53
ENGINE MECHANICAL - Timing Gears
8. INSTALL VACUUM PUMP
(a) Install a new O-ring to the vacuum pump.
(b) Install the vacuum pump with the two nuts.
Torque: 400 kg-cm (29 ft-lb, 39 Nm)
9. INSTALL OIL PIPE
Install the oil pipe with the bolt, two union bolts and four
new gaskets.
Torque: Bolt 200 kg-cm (14 ft-lb, 20 Nm)
Union bolt 185 kg-cm (13 ft-lb, 18 Nm)
10. INSTALL CAMSHAFT OIL SEAL RETAINER
(See step 6 on page EM-79)
11. INSTALL PULLEYS AND TIMING BELT
(See page EM -38)
12. INSTALL WATER PUMP PULLEY, FAN AND DRIVE
BELT
(See step 5 on page CO-9)
To Next Page
Loading...
Need help?
General
