TURBOCHARGER SYSTEM - Turbocharger TC-15
8. INSTALL TURBOCHARGER HEAT INSULATOR
Install the heat insulator with the two bolts.
Torque: 185 kg-cm (13 ft-lb, 18 Nm)
9. CONNECT WATER BY-PASS HOSES
10. INSTALL EXHAUST MANIFOLD HEAT INSULATOR
Install the heat insulator with the five bolts.
Torque: 185 kg-cm (13 ft-lb, 18 Nm)
11. INSTALL INTAKE PIPE
(a) Connect the air hose and install a new gasket and the
intake pipe with the three bolts.
Torque: 200 kg-cm (14 ft-lb, 20 Nm)
(b) Connect boost compensator vacuum hose.
12. FILL ENGINE WITH COOLANT (See page CO-5)
13. START ENGINE AND CHECK FOR LEAKS
14. CHECK ENGINE OIL LEVEL
To Next Page
Loading...
Need help?
General
