EM-34
ENGINE MECHANICAL - Timing Belt
(c) Remove the timing belt.
4. REMOVE TIMING BELT IDLER PULLEY
Using SST, remove the bolt, timing belt idler pulley and
plate.
SST 09923-00020
5. REMOVE NO.2 CAMSHAFT TIMING PULLEY
(a) Place matchmarks on the camshaft timing pulley No.2
flange and No.2 camshaft timing pulley.
(b) Remove the four bolts, camshaft timing pulley No.2
flange, No.2 camshaft timing pulley and camshaft
timing pulley No.1 flange.
6. REMOVE INTAKE PIPE
(IPZancMHZ)
(a) Disconnect the PCV hose.
(b) Remove the four bolts, intake pipe and gasket.
(c) (1HZ (Eourope))
Remove the intake pipe insulator.
(1HD-T)
(a) Disconnect the turbo vacuum hose.
(b) Loosen the air hose clamp bolt.
(c) Remove the three bolts, intake pipe and gasket.
To Next Page
Loading...
Need help?
General
