EM-56
ENGINE MECHANICAL - Cylinder Head
(1HD-T)
Remove the six hollow bolts, nozzle leakage pipe and
twelve gaskets.
8. REMOVE INJECTION NOZZLES
(1PZ and 1HZ)
(a) (1PZ)
Using SST, remove the five injection nozzles, seats
and gaskets.
SST 09268-64010
(b) (1HZ)
Using SST, remove the six injection nozzles, seats and
gaskets.
SST 09268-64010
HINT: Arrange the injection nozzles in correct order.
(1HD-T)
(a) Remove the bolt, washer, nozzle holder, injection
nozzle and seat.
(b) Remove the O-ring from the injection nozzle.
HINT: Arrange the injection nozzles in correct order.
To Next Page
Loading...
Need help?
General
