LU-6 LUBRICATION SYSTEM - Replacement of Engine Oil and Oil Filter
REPLACEMENT OF ENGINE OIL
AND OIL FILTER
NOTICE:
• Prolonged and repeated contact with mineral oil
will result in the removal of natural fats from the
skin, leading to dryness, irritation and dermatitis. In
addition, used engine oil contains potentially harm-
ful contaminants which may cause skin cancer.
Adequate means of skin protection and washing
facilities should be provided.
• Care should be taken, therefore, when changing
engine oil, to minimize the frequency and length of
time your skin is exposed to used engine oil. Protec-
tive clothing and gloves, that cannot be penetrated
by oil, should be worn. The skin should be tho-
rougthly washed with soap and water, or use wa-
terless hand cleaner, to remove any used engine oil.
Do not use gasoline, thinners, or solvents.
• In order to preserve the environment, used oil and used
oil filters must be disposed of only at designated dis-
posal sites.
1. DRAIN ENGINE OIL
(a) Remove the oil filler cap.
(b) Remove the oil drain plug, and drain the oil into a
container.
2. REPLACE OIL FILTER
(a) Using SST, remove the oil filter.
SST 09228-10001
(b) Clean and check the oil filter installation surface.
To Next Page
Loading...
Need help?
General
