EM-61
ENGINE MECHANICAL - Cylinder Head
DISASSEMBLY OF CYLINDER HEAD
(See page EM-54)
1. REMOVE VALVE LIFTERS AND SHIMS
HINT: Arrange the valve lifters and shims in correct order.
2. REMOVE VALVES
(a) Using SST, compress the valve spring and remove the
two keepers.
SST 09202-43013
(b) Remove the spring retainer, valve spring, valve and
spring seat.
HINT: Arrange the valves, valve springs, spring seats and
spring retainers in correct order.
(c) Using needle-nose pliers, remove the oil seal.
To Next Page
Loading...
Need help?
General
