FUEL SYSTEM - Injection Pump FU-35
(d) Remove the fuel cut solenoid, O-ring, spring, valve,
strainer and wave washer.
11. (w/TACHOMETER)
REMOVE PICKUP SENSOR
Remove the pickup sensor and O-ring.
12. REMOVE ADJUSTING LEVER
(a) Place the matchmarks on adjusting lever and shaft.
(b) Remove the nut, return spring guide, adjusting lever
and return spring.
13. REMOVE GOVERNOR COVER
(a) (w/HACand 1HD-T)
Remove the idle speed adjusting screw.
(b) Using a 5 mm hexagon wrench, remove the four bolts.
To Next Page
Loading...
Need help?
General
