STARTING SYSTEM - Pre-Heating System (Fixed Delay Type) ST-9
Fixed Delay Type
(HZJ80 and HDJ80)
ex. (Europe and Australia)
SYSTEM CIRCUIT
INSPECTION OF PREHEATING SYSTEM
1. INSPECT LIGHTING TIME OF GLOW INDICATOR
LIGHT
Turn the starter switch "ON", measure the lighting time.
Light lighting time: Approx. 5 seconds
2. INSPECT PREHEATING TIME
Turn the starter switch "ON", and measure the time battery
voltage is applied to terminal 1 of the pre-heating timer.
Pre-heating time: Approx. 18 seconds
To Next Page
Loading...
Need help?
General
