EM-35
ENGINE MECHANICAL Timing Belt
7. REMOVE CYLINDER HEAD COVER
Remove the twelve bolts (1PZ) or fourteen bolts (1HZ
and 1HD-T), two nuts, cylinder head cover and gasket.
8. REMOVE NO.1 CAMSHAFT TIMING PULLEY
(a) Hold the hexagonal wrench head portion of the cam-
shaft with a wrench, and remove the No.1 camshaft
timing pulley bolt.
(b) Using SST, remove the No.1 camshaft timing pulley.
SST 09950-20017
(c) Remove the set key.
To Next Page
Loading...
Need help?
General
