FU-42 FUEL SYSTEM Injection Pump
(b) Remove the distributive head and following parts:
(1) Two lever support springs
(2) Two plunger spring guides
(3) Two plunger spring shims
(4) Two upper spring seats
(5) Two plunger springs
23. REMOVE PUMP PLUNGER
Using SST, remove the pump plunger and plunger adjust-
ing shim together with the following parts:
(1) Spill ring
(2) Lower spring seat
(3) Upper plunger plate
(4) Lower plunger plate
SST 09260-54012 (09269-54030)
NOTICE: Do not touch the sliding surfaces of the
pump plunger with your hand.
24. REMOVE GOVERNOR LINK
Using SST, remove the two support bolts, gaskets and
governor link.
SST 09260-54012 (09269-54040)
25. REMOVE FACE CAMPLATE AND COUPLING
Remove the face camplate, spring and coupling.
To Next Page
Loading...
Need help?
General
