FU-5
FUEL SYSTEM - Replacement of Fuel Filter
D. Install new fuel filter
(a) Check and clean the fuel filter installation surface.
(b) Apply fuel to the gasket of a new fuel filter.
(c) Lightly screw the fuel filter into place, and tighten it
until the gasket comes into contact with the seat.
(d) Tighten it additional 3/4 turn by hand.
4. FILL FUEL FILTER WITH FUEL
Operate the hand pump until you feel more resistance.
5. CONNECT FUEL FILTER WARNING SWITCH
CONNECTOR
6. START ENGINE AND CHECK FOR FUEL LEAKS
To Next Page
Loading...
Need help?
General
