CH-15
CHARGING SYSTEM - Alternator
(b) Using a press and socket wrench, press out the front
bearing.
(c) Using SST and a press, press in a new bearing.
SST 09608-20012 (09608-00030)
(d) Install the bearing retainer with the four screws.
3. INSPECT REAR BEARING
Check that the bearing is not rough or worn.
4. IF NECESSARY, REPLACE REAR BEARING
(a) Using SST, remove the bearing cover and bearing.
SST 09820-00021
NOTICE: Be careful not to damage the fan.
Socket Wrench
CH0856
SST
CH0880
CH0868
CH0199
SST
CH0200
To Next Page
Loading...
Need help?
General
