Toyota 3S-GTE User Manual

ENGINE — ENGINE MECHANICAL “'53
REMOVE CAMSHAFTS
35.
5
3 .__, 6 Uniformly loosen and remove the IO bearing cap bolts
9 '- ’ ~ 3_- ‘-
_ -- ,_ in several passes. in the sequence shown, and remove
1 -91 -_ 5 .\ , _
‘ ._ ,’ 7 the 5 bearing caps, oil seal and camshaft. Remove the
9 -,__ 3 §,_(§ intake and exhaust camshafts.
K
W
» it
~)\
"> ~<
'3
%"
P1823)
36. REMOVE CYLINDER HEAD
(a) Using SST, uniformly loosen and remove the 10 cylin-
der head bolts in several passes. in the sequence
shown.
331' - SST 09043-38100
HINT: Cylinder head warpae or cracking could result
from removing in the incorrect order.
> »_ ii '§‘-:1!-"ill
3Y°gL%§ )>UO'\ -I4. O
O "‘ 3’)
terse-iaia
"'?#¥
O0
‘Q IF SO
001%
ll I
Z131"!!!
1°
"Q I Iii?
_g) pq LI.-
‘ai Qdifiii
2'.‘
15$ ’
P‘l8Z7I
918272
(b) Lift the cylinder head from the dowels on the cylinder
(?\,\ block. and place the cylinder head on wooden blocks
on a bench.
_l,j
—\/
V ~' HINT: If the cylinder head is off, pry between the
\
»\ /, f‘
K xk cylinder head and cylinder block with a screwdriver.
\ 7 > Qinsen NOTICE: Be careful not to damage the contact surfaces
X F f/ @ of the cylinder head and cylinder block.
Pry
PISYW
§;i§é2i:i

Toyota 3S-GTE Specifications

General

Brand	Toyota
Model	3S-GTE
Category	Engine
Language	English