SARA-R4/N4 series-AT Commands Manual
UBX-17003787 - R09

10V24 control and V25ter
Page 110 of 307
10.25î™–î™–î™–î™–Set to factory defined configuration &F
&F
SARA-R404M SARA-R410M-01B SARA-R410M-02B SARA-R410M-52B SARA-R412MModules
SARA-N4
Syntax PIN required Settings saved Can be aborted Response time Error referenceAttributes
full No No No - +CME Error
10.25.1î™–î™–î™–î™–Description
Resets the current profile to factory-defined defaults. Other NVM settings, not included in the profiles, are not
affected.
In case of success, the response is issued using the configuration of the result codes format (Q, V, S3 and S4
AT commands) loaded from the factory default profile. The other DCE settings are applied after the response
has been sent.
For more details on the settings stored in the profiles, refer to Appendix B.1.
10.25.2î™–î™–î™–î™–Syntax
Type Syntax Response Example
Action AT&F[<value>] OK
10.25.3î™–î™–î™–î™–Defined values
Parameter Type Description
<value> Number Only 0 allowed
10.26î™–î™–î™–î™–Display current configuration &V
&V
SARA-R404M SARA-R410M-01B SARA-R410M-02B SARA-R410M-52B SARA-R412MModules
SARA-N4
Syntax PIN required Settings saved Can be aborted Response time Error referenceAttributes
full No No No - +CME Error
10.26.1î™–î™–î™–î™–Description
Reports a summary of the current configuration and of the stored user profiles.
Since not all configuration items are listed with this command, see the example below for the list of the
displayed configuration items. Appendix B.1 provides the complete list of the configuration items stored
in the profiles.
The command does not display audio parameters. Audio parameters can be displayed by the
corresponding read command (i.e. AT+UMGC?).
10.26.2î™–î™–î™–î™–Syntax
Type Syntax Response Example
Action AT&V ACTIVE PROFILE:
List of commands stored in the
active profile with the related values
STORED PROFILE 0:
List of commands stored in the
profile 0 with the related values
STORED PROFILE 1:
List of commands stored in the
profile 1 with the related values
OK
ACTIVE PROFILE: &C1, &D1, &S1,
&K3, E1, Q0, V1, X4, S00:000, S0
2:043, S03:013, S04:010, S05:00
8, S07:060, +CBST:007, 000, 001,
+CRLP:061, 061, 048, 006, +CR:0
00, +CRC:000, +IPR:0, +COPS:0,0,
FFFFF, +ICF:3,1, +UPSV: 0, +CMGF:0
, +CNMI:1,0,0,0,0, +USTS: 0
STORED PROFILE 0: &C1, &D1, &S1,
&K3, E1, Q0, V1, X4, S00:000, S0
2:043, S03:013, S04:010, S05:00
8, S07:060, +CBST:007, 000, 001,
+CRLP:061, 061, 048, 006, +CR:0
To Next Page
Loading...
Need help?
General
