Ublox SARA-R4 Series User Manual

SARA-R4/N4 series-AT Commands Manual
UBX-17003787 - R09

AAppendix: Error result codes
Page 260 of 307
Numeric error code Description
1700 GPS GPIO not configured
1701 GPS GPIO ownership error
1702 Invalid operation with GPS ON
1703 Invalid operation with GPS OFF
1704 Invalid GPS aiding mode
1705 Reserved GPS aiding mode
1706 GPS aiding mode already set
1707 Invalid GPS trace mode
1708 Parameter valid only in case of GPS OTA
1709 GPS trace invalid server
1710 Invalid TimeZone
1711 Invalid value
1712 Invalid parameter
1713 Invalid operation with LOC running / GPS Busy
1801 IBM busy / eCall already armed/active
1802 IBM feature off / eCall feature off
1803 Wrong IBM requested
1804 Audio resource not available
1805 ECALL restriction
1806 eCall invalid dial number
1900 No SAP Server Connection
1901 SAP Protocol Error
1902 SAP Connection failure
1903 SAP Server Disconnection
1904 SAP Other terminal using service
1910 USECMNG import timeout expired (no input for > 20 s)
1911 USECMNG import file size exceeds limit
1912 USECMNG no memory available
1913 USECMNG invalid certificate/key format
1914 USECMNG database full
1950 CDC-ECM is not available
1951 CDC-ECM is busy
1952 No DHCP Packets received from the DTE
2000 Command timeout
3000 Command aborted
4000 APN configuration mismatch
4001 IP type configuration mismatch
A.2Message service error result codes +CMS ERROR
Numeric error code Description
1 Unassigned (unallocated) number
5 Delta firmware unavailable on FOTA server
8 Operator determined barring
10 Call barred
17 Network failure
21 Short message transfer rejected
22 Memory capacity exceeded
27 Destination out of service
28 Unidentified subscriber
29 Facility rejected
30 Unknown Subscriber
38 Network out of order
41 Temporary failure
42 Congestion

Ublox SARA-R4 Series Specifications

General

Brand	Ublox
Model	SARA-R4 Series
Category	Control Unit
Language	English