Unify OpenScape 4000 User Guide Hfa

104 Making calls
Choose from conversations
The conversations list is displayed on the screen. If the contact you want is not
visible, then select with
μ€ or search by entering the phone number or name.
Confirm the selected contact with the Softkey. The phone number is dialed.
or
If visible, confirm immediately with the Softkey for the contact. The phone num-
ber is dialed.
Calling with a direct station select (DSS) key
Prerequisite: You have configured DSS keys on your phone, for example a key
with label DSS X. For more information, see ”Setting up a selected dialing key”
 Page 91.
Press the DSS key.
When the participants answer, enter speakerphone mode.
or
^ Lift the handset.
Redialing
From the conversation list
You can use conversation list to call your last connected party. You can do this
via the history of a conversation (for more information, see ”Display the history
of a conversation”  Page 49) or via contact details (for more information, see
”Opening details of a conversation or conducting a call”  Page 37).
Via the fixed redial key
You can also call your last connected party via the Redial key.
Redial is the default function assigned to the key, unless otherwise configured
by your administrator.
< Press the redial key.
Georg Simon Ohm
- O
_
Georg Simon Ohm
O
_
DSS X
O
_
Note the meaning of the LED displays on the direct call keys  page 65.

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English