Unify OpenScape 4000 User Guide Hfa

176 Other settings and functions
Announcement (Broadcast) to all members of a
management group
With this function, you can send an announcement to all members (10 to 40) of
a management group at the same time.
Z After you have set the group call, you will receive a confirmation tone when you
can start the announcement.
^ Lift the handset.
or
: Press the key to use speakerphone mode.
j System code for “Speaker call-1-way bcst“ (ask relevant administrator if neces-
sary)
or
Press the “Speaker call-1-way bcst“ key, if it is set up.
j Enter the internal phone number of a group member.
Z The loudspeakers of all group telephones are automatically switched on and you
receive a confirmation tone. You can begin the announcement.
\ Hang up the handset to end the announcement.
^ Once a group member lifts the handset, they are then connected to you and the
announcement is cancelled.
: When a group member presses the loudspeaker key
or
the concerned line key of the announcement, they will then be separated from
the announcement. If the last remaining member of the group presses the loud-
speaker or line key, the announcement is ended.
Speaker call-1-way bcst
_
DSS
_

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English