Unify OpenScape 4000 User Guide Hfa

198 Private / Security
j Enter ID.
"Carried out" is displayed upon successful entry.
Lock local phone
Locking the phone
To protect the phone against unauthorized access, you can lock the phone so
that nobody can make calls or change settings without knowing the User pass-
word.
Predefined numbers from the dial plan can still be dialed when the phone is
locked. For more information, contact your administrator.
Activating the phone lock
# Hold down the key until the "Lock phone" message appears.
Press the Softkey to activate the lock.
Dialing an emergency number
If an emergency number is entered on the phone by the administrator, Emergen-
cy call appears on the display for selection when you have activated the lock.
You can also enter the emergency number via the dialpad.
The emergency call numbers pre-configured by the administrator can be called
at any time via the dialpad in the locked state.
Unlocking the phone
The display shows “Phone locked”.
Press the Softkey.
j Enter and confirm the User password, the phone is unlocked if the password is
correct.
or
Press the Softkey.
You can only lock the phone if you set a User password  page 195. The
password for this must not be the default setting "000000." Check, if nec-
essary, whether the phone lock function has been activated for you by the
administrator.
Lock
Ø
_
The number will be dialed automatically without pressing the Z button.
An empty option on the screen will be shown, therefore if you accidentally
press the Z button, the call will not be canceled.
œ Phone locked
Unlock phone
Ø
_
Admin unlock
Ø
_

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English