134 Using Bluetooth
Only a Function key with a function configured can be selected to be triggered
by the Bluetooth Remote button click. All unallocated keys are hidden.
Function keys from any attached Key Module are potentially available to be se-
lected. No shifted level keys can be selected.
The “Configure remote button” screen now shows the label for the Function key
that has been configured to be triggered by this Bluetooth Remote button device.
Trigger on reconnect
If the Bluetooth Remote button is disconnected (e.g. the device is in energy sav-
ing mode) and you want to reconnect it, the following may happen based on the
settings of the functionality “Trigger on reconnect”.
• If enabled, the remote button will connect and trigger the configured Function
key at the same time. You need to press the Remote button only once.
• If disabled, you need to press the Remote button twice. First time it will recon-
nect and second it will trigger the configured Function key.
To Next Page
Loading...
Need help?
General