216
Possible response:
Confirm "Delete other level" to save the phone number/function.
Possible 2nd cause:
If "Clear LED support" shows in menu:
You have tried to save a number without LED-display or an external number us-
ing a key that already has an internal number with LED-display.
Possible response:
Confirm "Clear LED support" to save the call number. The existing internal num-
ber remains on the other level without LED-display.
Pressed key does not respond:
Check if the key is stuck.
Phone doesn’t ring when called:
Check if your phone is on silent (the ringer off icon appears on the status bar
ïƒ page 30). If so, activate the ringer again.
To correct any other problems:
Contact your administrator if a fault persists for more than 5 minutes, for exam-
ple. Pass on the message displayed in the red field, if appropriate, as shown in
the next example. Problems that cannot be corrected should be referred to Cus-
tomer Service.
Contact partner in case of problems
Contact your administrator if a fault persists for more than 5 minutes, for exam-
ple.
To Next Page
Loading...
Need help?
General