Unify OpenScape 4000 User Guide Hfa

Using Bluetooth 119
Using a Bluetooth headset
You can connect a Bluetooth headset to your OpenScape CP700/CP700X,
which is approved for use with the OpenScape CP700/CP700X. Ask your ad-
ministrator about approved headset types.
Connecting the Bluetooth headset
Prerequisite: The Bluetooth function on your OpenScape CP700/CP700X is
activated  page 135.
@ Press the Main Menu key, if needed.
Open using the Softkey.
Open using the Softkey.
if needed j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Finding and connecting the Bluetooth headset
Now switch your Bluetooth headset to pairing mode (see the user manual sup-
plied with the device).
Paired devices are displayed. Start the search for new devices with the Softkey.
Start or set the paging function on the Bluetooth device if needed.
Located devices are displayed. Repeat the search if needed with the Softkey.
Select the relevant headset and open with the Softkey.
Confirm the pairing prompt with the Softkey. The Bluetooth device is paired and
added to the list.
or
A pairing PIN is requested.
j Enter the pairing PIN and confirm with the Softkey. The Bluetooth device is
paired and added to the list.
Service/Settings
_
$
User settings
-
_
$
Bluetooth
-
_
Paired devices
-
_
Paired devices
Õ
_
Nearby devices
Õ
_
?
Headset
-
_
Accept
Q
_
©
Enter pairing PIN...
Q
_

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English