Unify OpenScape 4000 User Guide Hfa

210
Web interface
General
You can configure a number of settings for your phone via the web interface. Communication oc-
curs via a secure HTTPS connection. Access to the web interface must be activated by your ad-
ministrator.
Launching the web interface
To launch the interface, open a web browser and enter the following:
https://[IP address of the phone]
[IP address of the phone] is the IP address of your phone.
or
https://[Name of the phone]
[Name of the phone] that was assigned by the administrator.
Licenses
This area provides you with the information about EULA (End User License Agreement) and Open
Source licenses. For further information, consult your administrator or refer to the administration
manual.
Administrator pages
This area lets you configure settings for administering your phone and the network environment.
Access to the Administrator pages is protected by the admin password. For further information,
consult your administrator or refer to the administration manual.
For more information on the IP address, the web interface address, and how to connect the
telephone to the network, refer to the section entitled "Network information"  page 207.
You might receive a certificate notification from the browser. Follow the instructions to down-
load the certificate.
You will be prompted to configure a user password the first time you call up the web interface
 page 195. You must log in with this password in future every time you want to open the
User pages.

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English