166 Other settings and functions
Using a different phone for a call in the same
way as your own
You can identify yourself with a personal identification number (PIN) on a differ-
ent phone of the OpenScape 4000-system (also on telephones of interlinked
OpenScape 4000-systems, e.g. at other company locations). Then you can use
the other phone
• calling with cost allocation,
• dial with project assignment,
• Check your mailbox,
• Use a phone number stored on your phone for redial,
• Enter appointments.
With an internal PIN you can divert your calls to another telephone at your place
of residence (call forwarding “redirect”).
Identify yourself on another phone
Prerequisite: You have received a PIN from your responsible administrator. An
internal PIN is required for your own OpenScape 4000-system. For other Open-
Scape 4000-systems in the network, you need a network-wide PIN.
@ Press the Main Menu key, if needed.
Open using the Softkey.
Open with the Softkey.
€ Select "PIN / COS".
Open with the Softkey.
Confirm.
If you have several PINs and you want to use another, select another PIN.
Applies in own OpenScape 4000 area
j # Enter your own phone number and press the hash key.
j # Enter the internal PIN and press the hash key.
or The network applies in your own and other OpenScape 4000-sys-
tems
j Enter the 2-digit node code for your own OpenScape 4000-system (ask respon-
sible administrator).
j # Enter your own phone number and press the hash key.
j # Enter the network-wide PIN and press the hash key.
Dial after successful identification.
You hear the dial tone. “Please dial“ appears on the display.
Service/Settings
_
Service Menu
-
_
PIN / COS
-
_
PIN 1
_
To Next Page
Loading...
Need help?
General