Unix
Xerox WorkCentre 3315DN/3325DN/3325DNI
System Administrator Guide
40
• Linux operating system that supports PrintTool.
Procedure
Follow the steps in Configure Static IPv4 Addressing using the Machine User Interface on page 28,
then return to this page.
Create the Print Queue
1. Open the LPRngTool from the Linux Client.
2. Select Add.
3. In the Names area, enter a name for your print queue.
4. The spool directory is the directory where print jobs are stored and is a subdirectory of
/var/spool/lpd. Add the name of the print queue to the end of the subdirectory path.
5. In the Hostname/IP of Printer area, enter the hostname or IP Address of the Xerox machine.
6. Select OK.
7. Select Exit to close the program.
8. To allow access to the printer, edit the /etc/hosts table to list the client system.
9. Edit and create the /etc/hosts.lpd file to list the client system.
Dynamic Addressing
Procedure
Follow the steps in Configure Dynamic IPv4 Addressing using the Machine User Interface on page 29,
then return to this page.
IMPORTANT: Highlight BOOTP in step 6.
• Follow the steps to Create the Print Queue on page 37.
To Next Page
Loading...
Need help?
General
