Yamaha F75 User Manual

Operation
64
To increase the trolling speed, press the “ ”
switch.
To decrease the trolling speed, press the
“” switch.
TIP:
 The trolling speed changes approximately
50 r/min each time a switch is pressed.
 If the trolling speed has been adjusted, the
engine returns to the normal trolling speed
when the engine is stopped and restarted
or when the engine speed exceeds ap-
proximately 3000 r/min.
EMU27822
Stopping engine
Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating
at high speed is not recommended.
EMU43852
Procedure
1. Push and hold the engine stop button or
turn the main switch to “ ” (off).
2. After stopping the engine, disconnect
the fuel hose from the fuel joint on the
fuel tank.
1. “ ” switch
2. “ ” switch
U6D63EE0.book Page 64 Friday, December 12, 2014 9:39 AM
©2019 Yamaha Motor Corporation, U.S.A.

Yamaha F75 Specifications

General

Cylinders	4
Fuel Induction System	EFI (Electronic Fuel Injection)
Prop Shaft Horsepower	75 hp
Full Throttle RPM Range	5000-6000 RPM
Gear Ratio	2.15:1
Starting System	Electric
Engine Type	4-stroke
Alternator Output	25A
Steering Angle	35° from center, either direction
Shaft Length	20 in., 25 in.
Fuel Tank Capacity	N/A (External)
Recommended Fuel	Regular Unleaded (Minimum Pump Octane 87)
Warranty	3-Year Limited Warranty