110
13 LOAD LIFTING
Do not hang a load without the kit's lifting facilities.
9.3 Lifting Kit, page 50
WARNING
It is forbidden to lift loads over people.
Lifting operations are prohibited if the lifting accessory is resting on a sharp edge
of the equipment, which could damage it and cause it to drop the load.
IMPORTANT
It is forbidden to handle the loads without turning on the overload box.
When using the machine for log or long charge handling, the machine must be fit-
ted with a frontal protection structure.
To make lifting a load with the machine, use the following procedure:
1. Check that the WLL
3
of the lifting accessories used are compatible with the load being
lifted.
2. See the load tables for your machine so you do not exceed these limits during the lifting
operation.
3. Install a device that can oppose the accidental release of the load on the machine's lifting
ring (with latch hook, shackle, eye...) and whose WLL
3
is equal to or greater than the load to
be lifted.
4. Attach the load to be handled with the lifting accessory.
5. Pass the lifting accessory in the lifting device and lock the device.
6. Turn the overload housing switch to ON located in the machine's cab.
7. Lift the load slowly and smoothly.
Note
Never lift a load roughly; the quick movements and sudden stops can cause overloads.
IMPORTANT
Limit the load's lifting height as much as possible during handling.
3. Working Load Limit (WLL)
To Next Page
Loading...
Need help?
General
