9 Options
49
Position holding button
To use the position holding button:
3 = Position holding button
1. Operate the accessory with the proportional roller.
2. Press the position holding button. Release the pro-
portional roller.
The proportional roller control pressure is blocked
and the LED on the corresponding joystick comes
on.
3. The accessory operation is maintained and the ac-
cessory is operated at the rate set by the knob.
4. Press the position holding button again to return
the pressure to its starting level.
CAUTION
Do not use the position holding with bucket tilting, you would risk damaging the machi-
ne's hydraulic circuit.
9.2 Circuit breaker
• The machine can be fitted when this option is
requested.
• This switch is used to disconnect the battery
directly.
1 = Circuit breaker
To Next Page
Loading...
Need help?
General
