154
7 MAINTENANCE BY THE DEALER
Frequency
1st time
Parts Operations
Every 500h
50h
Hydraulic oil return filter Replacement
50h
Engine oil
9
Replacement
50h
Oil filter
9
Replacement
– Fuel filter
Replacement
–
Rotation reducer Replenish engine oil
–
Travel gears Replenish engine oil
–
Air filter Replacement
–
Radiator vents Cleaning
Every 1000h
–
Hydraulic oil Oil replacement
50h
Travel gears Oil replacement
50h
Rotation reducer Oil replacement
–
Bearing rollers and bearings, idler
wheels
Greasing
–
Aspiration filter Cleaning or replacement depending on the
filter
–
Alternator belt Replacement
–
Intake and exhaust valves Play adjustment
–
Fuel pump Check
–
Battery electrolyte Density check
–
Cylinder head block Bolt re-tightening
Every 2000h
–
Fuel hose, coolant hose Verification and replacement
–
Cooling fluid Replacement
–
Injectors and injection pressure Inspection and calilbration
Non periodic
–
Cooling system Cleaning
It is important to entrust the machine to a deal at the intervals indicated so that the dealer can
carry out the maintenance operations necessary for the machine to operate correctly.
You should also contact your dealer in the following cases :
• part missing, broken or loose
• horn defective
• time counter defective
• electric circuit defective
• battery defective
• light(s) defective
In general, contact your dealer as soon as you think something is wrong.
9. Every 500h / Every year
To Next Page
Loading...
Need help?
General
