15 Transporting the machine
115
15.3 Tying down the machine
WARNING
Do not perform the tie-down if a person stands on the machine or on an accessory.
WARNING
Use a tie-down accessory (belt, chain, cable) compatible with the
weight of the machine and compliant with European standards.
Check the tie-down accessory labelling to know the WLL
4
. In the ab-
sence of or damage to the accessory labelling, do not use it without be-
ing assured of its WLL
4
.
WARNING
Before transporting the machine, check the total height of the load.
2 Working dimensions, page 164
1. Check the condition of the transport vehicle surface. If the surface is greasy, it must be
cleaned before installing the machine on the transport vehicle.
Note
If the transport vehicle surface is steel, provide a non-slip mat or spacers to prevent
the machine tracks from slipping.
2. Check the WLL
4
of the tie-down points of the transport vehicle, it must be at least the
WLL
4
recommended for tying down the accessories.
D Lashing record, page 180
3. Check the location and condition of the machine tie-down points.
4. Tie-down the machine at the points provided for that purpose and that are indicated on the
machine.
4. Working Load Limit (WLL)
To Next Page
Loading...
