2 Usage precautions
75
2.3.10 Working in a muddy area
• Operate the machine carefully so that it does not get stuck. If it does get stuck, release it us-
ing the following procedures.
If only one track is stuck
1. Place the bucket on the muddy side.
2. Lift the track.
3. Place wood or a wedge under the track runners.
4. Raise the bucket.
IMPORTANT
When you raise the machine, support yourself on the ground with the lower part of the
bucket (and not with the teeth). The angle between the boom and the arm must be 90° to
110°.
If both tracks are stuck
1. Place a log or piece of wood under the tracks.
2. Push the bucket into the firm ground.
3. Retract the arm as if to dig and move forward with
the side movement levers to get out of the mud.
2.3.11 Working in an area with reduced visibility
• When working in a dimly-lit area, switch on the lights and front headlights and provide ad-
ditional lighting if necessary.
• Stop all work when fog, snow or rain hinders your visibility.
To Next Page
Loading...
Need help?
General
