5 Description of the driving position
24
5.2.6 Engine rate setting
• Turn the switch to the left to decrease the engine
speed.
• Turn it clockwise to increase engine speed.
5.2.7 Engine slow down switch
• Use this switch to automatically reduce engine speed.
• When the auto-idle switch is ON and the machine controls are in neutral, the engine speed
is automatically reduced after 4 seconds.
• If you use the machine controls, the engine speed will automatically returns to the speed
set by the engine speed knob.
ON = Auto-idler activated The indicator light is on.
OFF = Auto-idler deactivated The light is off.
5.2.8 Eco mode switch
• This switch is used to reduce fuel consumption by
reducing the engine rate.
ON = eco mode activated. The indicator light is on.
OFF = eco mode deactivated. The light is off.
5.2.9 Engine stop switch
1 = STOP
2 = Normal
• If the engine does not stop when the ignition key
is set to "OFF", set this switch to "STOP". After
stopping the engine, make sure you put the engine
stop switch to the "NORMAL" position.
• When this switch is set to "STOP", the engine can
not be started. Also, make sure to position the igni-
tion key to the "OFF" position to avoid draining the
battery.
To Next Page
Loading...
Need help?
General
