9 Options
52
9.3.4 Lifting Tables
• A table summarizing the machine lifting capacities is provided with the safety valves.
DANGER
The board must be installed in the cab so as to be visible by the operator from the driver
position while operating the machine.
Check it out before doing any load lifting.
9.4 Air conditioning
• The machine can be fitted when this option is requested.
• The air conditioning system comprises a control system, a compressor, a condenser, and an
evaporator.
6 Operation of the air conditioning, page 42
9.5 Quick hitch
• The machine can be fitted when this option is requested.
CAUTION
Before any connection or disconnection of the hydraulic hoses, remove the residual pres-
sure from the hydraulic circuit.
2.1.1 Removing the residual pressure, page 131
Connecting
1. Insert the adapter into the receiver.A slight click
indicates that the connection is successful. The ball
is released from the adapter groove located on the
receiver.
2. Turn the adapter on the receiver to secure the
connection.
Note
Before each use, clean the receiver surfaces.
Disconnecting
To disconnect, turn the adapter to align the ball with the groove located on the receiver and slide
the adapter backwards.
To Next Page
Loading...
Need help?
General
