YASKAWA Varispeed f7 User Manual

Modes
3-5
 Switching Modes
The mode selection display will appear when the MENU Key is pressed from a monitor or setting display.
Press the MENU Key from the mode selection display to switch between the modes.
Press the DATA/ENTER Key from the mode selection key to monitor data and from a monitor display to
access the setting display.
Fig 3.3 Mode Transitions
IMPORTANT
When running the Inverter after using Digital Operator, press the MENU Key to enter the drive mode (DRIVE
indicator will flash) and then press the DATA/ENTER Key from the drive mode display to bring up the monitor
display (DRIVE indicator will light). Run Commands can't be received from any other display. (Monitor display
in the drive mode will appear when the power is turned ON.)
Drive Mode
DRIVE QUICK
VERIFY
A.TUNEADV
DRIVE QUICK
VERIFY
A.TUNEADV
MENU
MENU
Quick
Programming Mode
DRIVE QUICK
VERIFY
A.TUNEADV
MENU
Advanced
Programming Mode
DRIVE QUICK
VERIFY
A.TUNEADV
MENU
Verify Mode
DRIVE QUICK
VERIFY
A.TUNEADV
MENU
Autotuning
Mode
(Operation possible)
DRIVE QUICK
VERIFY
A.TUNEADV
DRIVE QUICK
VERIFY
A.TUNEADV
DRIVE QUICK
VERIFY
A.TUNEADV
DRIVE QUICK
VERIFY
A.TUNEADV
DRIVE QUICK
VERIFY
A.TUNEADV
Power ON
DRIVE QUICK
VERIFY
A.TUNEADV
DRIVE QUICK
VERIFY
A.TUNEADV
DRIVE QUICK
VERIFY
A.TUNEADV
Mode Selection Displays
Monitor Displays
Setting Displays
When returning from a setting
display, the rightmost digit
of the monitor display will
flash.
If a user constant is changed
the number will be dislayed.
ESC
DATA
ENTER
ESC
DATA
ENTER
ESC
ESC
DATA
ENTER
DATA
ENTER
ESC
DATA
ENTER
DATA
ENTER
DATA
ENTER
DATA
ENTER
ESC
DATA
ENTER
ESC
ESC
DATA
ENTER
DATA
ENTER
Lit Flashing Not lit

YASKAWA Varispeed f7 Specifications

General

Brand	YASKAWA
Model	Varispeed f7
Category	Inverter
Language	English