Tilt steering wheel
Tilting and protrusion of steering wheel
When the steering wheel is adjusted, fold the locking lever (2) to the instrument panel and the
locking lever (1) so that it is directed parallel to the axis of the steering wheel column. After slight
ullin
of the lockin
levers in the direction from the steerin
wheel column, the levers can be set to
any position.
Adjusting the angle of the wheel
The angle can be adjusted by tilting the wheel after it is
unlocked by moving the lever (1) in the direction shown by
the arrow.
After adjusting, lock the wheel by pressing the lever (1) in
the opposite direction than shown by the arrow.
PCLPN023
Tilting column of steering wheel enables variable setting o
position of the steering wheel both in terms of angle and
height.
Height setting of steering wheel
The setting is done by protrusion or retracting the steering
wheel after unlocking arrestment by turning a lever (1) in
the direction of an arrow. After setting the steering wheel,
lock the lever (1) by tightening in the direction of an arrow.
Angle setting of steering wheel
Setting is done by tilting the steering wheel after unlocking
the lock by turning the lever (2) in the direction of the
arrow. After setting the steering wheel, secure the lever
(2) by retightening against the direction of the arrow.
PCLPN024
ACQUAINTANCE WITH TRACTOR
To Next Page
Loading...
Need help?
General