Display - history of defects
P18N076
Press the button (B) to enter the service menu
1 - use the buttons (C) and (D) to select the item listing of defects; press the button (B) to enter the screen
selection of tractor nodes from which you want the listing of defects to be displayed.
2 - use the buttons (C) and (D) to select the tractor node from which you want the listing of defects to be
displayed; press the button (B) to enter the screen displaying the listing of defects for the selected tractor
node.
3 - the listing of defects of the selected tractor node; use the buttons (C) and (D) to scroll between individuals
defects
The table of the listing of defects contains the following columns:
Nr. - sequence number of the defect record
SPN - defect code
FMI - code for defect specification
OC - number of defect repetitions
Repeatedly press the button (A) to return to the main screen.
Display - setting language mutation
P18N077
Press the button (B) to enter the service menu
1 - use the buttons (C) and (D) to select the item Language; press the button (B) to enter the screen with
language mutations.
2 - use the buttons (C) and (D) to select the required language mutation and press the button (B) for
confirmation. The instrument panel is switched to the selected language mutation.
Press the button (A) to return to the main screen.
If you want to change metric units to Anglo-Saxon, select the language mutation ENG. IMP.
To Next Page
Loading...
Need help?
General